The Cutting Edge

They're one simple rule when buying knives for your kitchen: The right knife for the right job. It may sound logical enough, but grabbing any old knife that’s nearby to do a job can lead to lost productivity and a shorter lifespan for the knife. So here’s a shortlist of the very basic, must-have knives for every kitchen, along with some thoughts from the folks who use knives most—chefs.

The knife kit

Chef’s knife. The mainstay of any kitchen, the blade length on a chef’s knife varies between 6 and 12 inches. The long blade of the knife does most of the slicing work; its sharp point can be used for piercing or detailing. The weight of the blade should be roughly equivalent to that of the handle, a factor important to Chef Salvatore Gisellu of Urban Crust in Plano, Texas. He considers “the shape, weight and balance between the blade and handle the most important features to look for when buying a knife.”

Paring knife. With a blade length ranging from 2 to 4 inches, this knife is used for paring and trimming jobs, such as removing the peels from fruits. Available in both 31⁄2- and 41⁄2-inch blade lengths, Culinar paring knives from Wusthof are forged from a single piece of steel and have stainless steel handles.

Boning and filleting knife. The boning knife is used to cut meat off a bone; the filleting knife to take the flesh off fish. The blade of the boning knife can be either flexible or rigid; filleting knives tend to be more rigid. Blade length on the boning knife averages between 3 and 8 inches; the filleting knife is slightly larger. Mercer’s new, moderately priced Renaissance line offers 6-inch boning knives with either stiff or flexible blades.

Slicer. Perfect for slicing breads or tomatoes, the slicer has a distinctive edge (known as a Granton edge) with ovals notched into the blade to help avoid crushing delicate food. The blade can be anywhere from 14 to 18 inches, and can be straight or offset from the handle. The Dexter Connoisseur slicer features a 14-inch rosewood handle and a high-carbon steel blade.

Santoku. This Japanese import has made big inroads in U.S. kitchens over the past few years. It’s identified by its wide blade and tip that curves down to a point. Most santoku knives have a Granton edge similar to those on slicers. Blade length ranges from 7 to 9 inches. Paula DaSilva, executive chef of 1500° at Eden Roc on Miami Beach, says, “For everyday chopping I use a Santoku because I like how light they are.”

More From FoodService Director

Ideas and Innovation
lettuce eat dining

Forced to battle crumbling infrastructure and a constant churn of trends, sometimes the best way to save a foodservice operation is to change it entirely. As Steve Mangan, director of dining at the University of Michigan, puts it, “At some point when your building starts to fail, the cost of maintenance stands out.” But for operators with limited budgets, the challenge is discerning the right time to do so—and how far to take it.

At Jefferson High School, change came because little worked anymore. The Cedar Rapids, Iowa, school’s cafeteria hadn’t been updated since 1957; students...

Managing Your Business
farmer produce

The seeds of farm-to-table 2.0 have officially blown into noncommercial foodservice. Since the movement has caught the attention of the segment during the past decade, operators have broadened agricultural collaborations outside of just supply. As a result, a new strain of the movement has been created that treats farms as allies in events, training and innovative growing systems.

The 500-bed Overlook Medical Center in Summit, N.J., didn’t start out sourcing produce from local farms; instead, it administered its own growing programs, including an on-site garden and honeybee apiary...

Ideas and Innovation
fsd screenshot web

A full year has passed since we redesigned FoodService Director magazine, taking the publication from its longtime tabloid dimensions to a more convenient size and more creative design, and recasting the content to provide actionable, peer-to-peer insights and ideas for FSDs.

Now we are thrilled to announce that we’ve extended the makeover to our website as well. The new FoodServiceDirector.com has been redesigned to be more engaging and even easier to use. We’ve made it faster to find information, from recipes to HR best practices, that will help you run your facility better....

Managing Your Business
wage feud business

As plans to increase the minimum wage surge ahead in states such as New York and California, operators eventually will feel the reverberations shake up labor costs for more than just hourly workers. As associate wages gain on manager salaries, operators will have to answer a call for reciprocal increases. FSD spoke with operators who advised going gently into the brave new world of heightened labor costs, investing in talent and making cuts elsewhere; however, they did offer three perfectly proactive tactics to make the process as seamless as possible.

1. Keep talking

Even though...

FSD Resources